Migrating to Pebble v2.0

Note: This document applies to Pebble Trackers running software version v1.0.x.

If your device shows version v2.0 or higher, you are all set. In this case, please proceed to Device Registration if you haven't done so yet.

Overview

Please choose the firmware update method that best suits your situation and follow the corresponding instructions:

Method 1: Firmware Update over USB

This method applies to any device, regardless of the registration status.

If you cannot perform a USB firmware update, please proceed with:

Method 2: Firmware Update Over The Internet

Follow the 1.0 Device Registration guide if you haven't registered your Pebble Tracker
Follow the Online Firmware Update guide to update the device firmware to v2.0
Proceed to Device Registration guide to register your device

Once the firmware update is complete, please move to the Device Registration